![]() ProForm |
![]() Stainless Steel |
![]() Thermocrete |
Pro Form is a composite lining system that gets inflated into the chimney flue and steam pressure is added to harden the resin which will turn into hard composite liner. It conforms to any shape, size and length of the chimney and become a non-destructive chimney lining system which is corrosion proof, flame and heat resistant, airtight liner with a rigidity of a steel.
With the inflatable chimney liner technology existing size of the chimney flue is minimally reduced 1/4� of an inch making it an ideal chimney relining solution for odd shape flues, multiple offsets and already undersized chimney flues - perfect for commercial applications.
Pro Form is already listed as a Chimney Liner System with Under Writers Laboratories known as UL under 1777 Specification for Chimney Liner system for Gas and Oil Application. It can be used on the commercial chimneys undergoing oil to gas conversion or any fuel change. It is durable and acceptable worldwide as a chimney liner system. Although new in the States this product has been accepted for use through the New York State and New Jersey area.
Pro Form sizes are
available from 4� to 40� in diameter with heights up to
330� making it an ideal one day solution chimney
relining system for most commercial buildings.
Eliminating the need for external boilers and minimal
interruption�s for heat and hot water heater boilers.
After the composite resin has cured during steam
application boilers can be turn on almost instantly.
The
material of DualFuel-ProForm made from three main
components:
Interlocking tube-shaped sleeve for installation purpose only- will be removed after steam curing.
Prepreg layer- This is glass fiber reinforced thermosetting resin with ceramic filler, a so-called composite material. This part facing flue gas �after item 1 removed before using...
Exterior Fiber- This layer made from special fabric non-elastic outer layer to prevent physical abuse.
The liner is initially
flexible in shape easy to insert in brick chimney, tied
top end to seal for any steam to leak, apply steam at
bottom of the liner up to 300 deg F and pressure up to
2.25 psi for two hours until it cured as a solid
construction.
DualFuel-ProForm chimney liner is
to be installed in masonry chimneys and metal chimney�s
that are no longer code conforming and are used to vent
gas or oil fired appliances only. The liners are
manufactured in sizes of 3 in. to 40 in. outside
diameters. The chimney liners are intended for
installation in masonry chimneys having a minimum height
of 25 ft. and a maximum height of 350 ft.
The main area of
application of Dual Fuel ProForm Chimney RestorationTM
is the lining of existing and new chimneys. It is UL
approved to be used with gas and oil heated boilers. It
can be used with all types of boiler as well as with
chimneys of all sizes and shapes. Its rigidity
characteristics enable it to be used for the
construction of freestanding chimneys as well.
Suitable for Residential, Commercial, and Industrial
chimneys in lengths up to 350' and 40" in diameter.
website design & hosting by:
SBSnet.com